Als u dit leest ondersteunt uw browser geen frames.
U kunt dan onderstaand menu gebruiken om de afzonderlijke pagina's te bekijken.
Onder dit menu staat verder de inhoud van alle hoofdpagina's onder elkaar.
Events
Home
Certificates
History
Organisation
Pomac
Self-priming pumps
Food
Lobe pumps
Eccentric screw pumps
Liquid ring pumps
Flexible impeller pumps
Centrifugal pumps
Lobe pumps
Truck pumps
Starch pumps
Lobe pumps
Centrifugal pumps
Eccentric screw pumps
Liquid ring pumps
Self-priming pumps
Centrifugal pumps
Eccentric screw pumps
Lobe pumps
Flexible impeller pumps
Self- priming pumps
Liquid ring pumps
Beverage
Pharmaceutical
Chemical
Starch
Centrifugal pumps
Products
Liquid transport
Brochures
Curves ZA
Curves CP-CPZA
Downloads
Curves PLP
Curves IP
Manuals
Curves SP
Contact form
How to find us
Contact
Bedankt
Headquarter
Agents
Pomac Pompen
HomePomac Pumps Pomac Pumps, headquarted in Tolbert, the Netherlands, develops and manufactures a complete product range of hygienic: - Centrifugal pumps - Lobe pumps - Truck pumps - Self-priming pumps - Eccentric screw pumps - Starch pumps - Liquid ring pumps - Flexible impeller pumps These pumps are used worldwide in a variety of industries, including food, beverage, pharmaceutical and chemical. The Pomac organization is characterized by a strongly customer-oriented policy, flexibility, excellent service, and short delivery times. Pomac bv Feithspark 13 9356 BX Tolbert Tel:0031- (0)594-512877 Fax:0031-(0)594-517002 | |
Pomac pompen
Pomac
pomac geschiedenis
History
1977 | Pomac Pumps, was founded in 1977. Since this time, Pomac Pumps has been producing and selling hygienic pumps made of stainless steel. The former organization served as a basis for the Pomac Industries Group, founded in 1985. Due to its autonomous growth, this group now comprises 2 independent companies. | 
|
| today | At this point in time, Pomac Industries Group consists of two independent organizations: - Pomac Pumps
- Pomac Automation
| 
|
pomac ehedg pompen
Certificates
EHEDG European Hygienic Engineering & Design Group

download .pdf 353 Kb | The Pomac hygienic lobe pumps (PLP) and centrifugal pumps (CP) were tested and certified in accordance with the European Hygienic Equipment Design Group (EHEDG) clean-in-place (CIP) protocol. This test result demonstrates that the pump, including the shaft seals, has good clean-in-place characteristics. |
What is EHEDG? CLICK HERE |
www.ppso.nl
Pomac organisatie
Organisation
General | The Pomac Pumps organization encompasses three primary activities. Apart from the production of pumps, the Tolbert site also organizes all sales and service on a national as well as an international scale. Target groups include the food, beverage, pharmaceutical, and chemical industries. |
|
Mission | Pomac Pumps employs a team of motivated employees, cooperating in their attempt to realize the customer’s demands while continuously improving pump technology. Thus, the company attains a consistent growth rate, allowing new investments. | |
Strategy | Development of new products for the displacement of viscous liquids, leading to a strong synergy with existing products. Offering a complete product line of pumps for the displacement of low-viscosity as well as high-viscosity media in the food, beverage, pharmaceutical, and chemical industries. | |
Sales | The Tolbert head office coordinates all national and international sales. The company’s own sales team as well as agents serve the national and international markets. |
|
Features | The success of Pomac Pumps is based on the following factors: - solving existing pumping problems.
- gaining acceptance as a manufacturer due to a favorable price/quality ratio.
- excellent delivery times due to an intelligent construction concept.
- in-house production of all pump parts.
- a wide capacity / pressure range.
- a relatively small organization with short communication lines.
| |
Service | The service is being coordinated by the Tolbert production site. | 
|
assortiment pomac pompen
Products
Pomac zelfaanzuigende centrifugaalpompen
Self- priming centrifugal pumps -CP/ZA-

| This self priming centrifugal pump is an extension on the CP-program. It is characterised by it self priming capacities, which makes this pump type ideally suited for pumping liquids with entrained air/gasses. By utilising the open impeller it is also possible to pump liquids containing solids. Flow rates up to 200 m3/h with manometric heads up to 9 bar. These pump types have a high degree of interchangeability with centrifugal pumps. Depending on the product to be pumped the pump can be supplied with: - closed impeller
- half open impeller
- open impeller
|
|
Brochure
Manual
|
pomac schroefpompen schroefpomp wormpompen wormpomp
Hygienic eccentric screw pumps -SP-



| This pump technology is used wherever liquids, including those with high viscosity, must be pumped with minimum shear stress.- Outputs from 50 to 200.000 liters/h
- Pressure differentials to 24 bar
- Viscosities to 20.000 Mpas
- Solids content to 35% TS
- CIP and SIP cleanable
Applications: beer, wort, yeast, milk, cream, yoghurt, whey, juices, concentrates.
mayonaise, mustard, jelly, jam, chocolate, honey, fruit with stones, potato peels, spinach, vegetables |
Brochure
Manual |
Pomac sanitaire centrifugaalpompen centrifugaalpomp
Hygienic centrifugal pumps -CP-



| The hygienic centrifugalpump is designed to handle liquids with viscosities up to 300 cP with the liquid producing either positive or negative suction on the pump inlet and has flow rates up to 300 m3/h with manometric heads up to 13 bar. Our hygienic centrifugal pump pump has been built and tested in accordance with EHEDG standards. Depending on the product to be pumped the pump can be supplied with: closed impeller half open impeller open impeller
A special-purpose centrifugal pump was developed for sensitive liquids. This type, CP WW, displaces the medium without damaging it. The CP WW lends itself excellently to the transfer of substances such as curds and liquids containing delicate particles. NEW: Centrifugal pumps with stainless steel electric motors.
| Brochure Manual
|
Pomac sanitaire lobbenpompen lobbenpomp
Hygienic lobe pumps -PLP-




| The Pomac PLP lobe pumps are designed to achieve maximum pump performance combined with minimal product damage. Specific attention is paid to the bearing construction and the rigidity of the shaft. The design is kept as compact as possible and the volume between the lobes is optimized. This makes the PLP range suitable for high working pressures up to 15 bar. The application range comprises a capacity of up to 110 m3/h. The entire pump section as well as the gearbox is made of stainless steel. The pump is easily cleaned resulting in less maintenance time. The possibility of mounting the pump with the connections placed vertically ("self-draining position") makes it universally applicable. 
The EHEDG-marking only applies to PLP pumps in vertical, self-draining execution, fitted with EHEDG approved connections.
|
Brochure Manual |
Pomac flexibele impellerpompen impellerpomp
Flexible impeller pumps -IP-




| Flexible impeller pumps are suitable for pumping clean, troubled or high viscous liquids. One of the main benefits is its dry self-priming capacity. The pumps give a constant, non-pulsating output, which can be reversed easily by changing the direction of rotation. Its simple construction makes cleaning and inspection of the pump very easy. The rubber impeller is self-lubrcating and rotates in the pump casing without any axial and radial play.
|
Brochure
|
Food industry
The following functional pump principles are applied in this specific market:
Pomac zelfaanzuigende waterringpompen waterringpomp
Hygienic self-priming centrifugal pumps -ZA-


| This self priming pump is functioning according to the liquid ring-principle which enables it to pump liquids with entrained air/gasses. Flow rates up to 60 m3/h with manometric heads up to 5 bar.
| Brochure Manual
|
Hygienic lobe pumps -PLP-




| The Pomac PLP lobe pumps are designed to achieve maximum pump performance combined with minimal product damage. Specific attention is paid to the bearing construction and the rigidity of the shaft. The design is kept as compact as possible and the volume between the lobes is optimized. This makes the PLP range suitable for high working pressures up to 15 bar. The application range comprises a capacity of up to 110 m3/h. The entire pump section as well as the gearbox is made of stainless steel. The pump is easily cleaned resulting in less maintenance time. The possibility of mounting the pump with the connections placed vertically ("self-draining position") makes it universally applicable. 
The EHEDG-marking only applies to PLP pumps in vertical, self-draining execution, fitted with EHEDG approved connections.
|
Brochure Manual |
Hygienic eccentric screw pumps -SP-



| This pump technology is used wherever liquids, including those with high viscosity, must be pumped with minimum shear stress.- Outputs from 50 to 200.000 liters/h
- Pressure differentials to 24 bar
- Viscosities to 20.000 Mpas
- Solids content to 35% TS
- CIP and SIP cleanable
Applications: beer, wort, yeast, milk, cream, yoghurt, whey, juices, concentrates.
mayonaise, mustard, jelly, jam, chocolate, honey, fruit with stones, potato peels, spinach, vegetables |
Brochure
Manual |

Flexible impeller pumps -IP-




| Flexible impeller pumps are suitable for pumping clean, troubled or high-viscose liquids. One of the main benefits is its dry self-priming capacity. The pumps give a constant, non-pulsating output, which can be reversed easily by changing the direction of rotation. Its simple construction makes cleaning and inspection of the pump very easy. The rubber impeller is self-lubrcating and rotates in the pump casing without any axial and radial play.
|
Brochure Curves
Dimensional drawings
|
Hygienic self-priming centrifugal pumps -ZA-



| This self priming pump is functioning according to the liquid ring-principle which enables it to pump liquids with entrained air/gasses. Flow rates up to 60 m3/h with manometric heads up to 5 bar.
| Brochure Manual
|
Self- priming centrifugal pumps -CP/ZA-

| This self priming centrifugal pump is an extension on the centrifugal pump program. It is characterised by it self priming capacities, which makes this pump type ideally suited for pumping liquids with entrained air/gasses. By utilising the open impeller it is also possible to pump liquids containing solids. Flow rates up to 200 m3/h with manometric heads up to 9 bar. These pump types have a high degree of interchangeability with centrifugal pumps. Depending on the product to be pumped the pump can be supplied with: - closed impeller
- half open impeller
- open impeller
|
|
Brochure
Manual
|
Hygienic centrifugal pumps -CP-



| The hygienic centrifugalpump is designed to handle liquids with viscosities up to 300 cP with the liquid producing either positive or negative suction on the pump inlet and has flow rates up to 300 m3/h with manometric heads up to 13 bar. Our hygienic centrifugal pump has been built and tested in accordance with EHEDG standards. Depending on the product to be pumped the pump can be supplied with: closed impeller half open impeller open impeller
A special-purpose centrifugal pump was developed for sensitive liquids. This type, CP WW, displaces the medium without damaging it. The CP WW lends itself excellently to the transfer of substances such as curds and liquids containing delicate particles. NEW: Centrifugal pumps with stainless steel electric motors.
| Brochure Manual
|
Beverage Industry
The following functional pump principles are applied in this specific market:
Hygienic lobe pumps -PLP-




| The Pomac PLP lobe pumps are designed to achieve maximum pump performance combined with minimal product damage. Specific attention is paid to the bearing construction and the rigidity of the shaft. The design is kept as compact as possible and the volume between the lobes is optimised. This makes the PLP range suitable for high working pressures up to 15 bar. The application range comprises a capacity of up to 110 m3/h. The entire pump section as well as the gearbox is made of stainless steel. The pump is easily cleaned resulting in less maintenance time. The possibility of mounting the pump with the connections placed vertically("self-draining posotion") makes it universally applicable. 
The EHEDG-marking only applies to PLP pumps in vertical, self-draining execution, fitted with EHEDG approved connections.
|
Brochure Manual |
Hygienic eccentric screw pumps -SP-



| This pump technology is used wherever liquids, including those with high viscosity, must be pumped with minimum shear stress.- Outputs from 50 to 200.000 liters/h
- Pressure differentials to 24 bar
- Viscosities to 20.000 Mpas
- Solids content to 35% TS
- CIP and SIP cleanable
Applications: beer, wort, yeast, milk, cream, yoghurt, whey, juices, concentrates.
mayonaise, mustard, jelly, jam, chocolate, honey, fruit with stones, potato peels, spinach, vegetables |
Brochure
Manual |
Hygienic self-priming centrifugal pumps -ZA-


| This self priming pump is functioning according to the liquid ring-principle which enables it to pump liquids with entrained air/gasses. Flow rates up to 60 m3/h with manometric heads up to 5 bar.
| Brochure Manual
|
Self- priming centrifugal pumps -CP/ZA-

| This self priming centrifugal pump is an extension on the centrifugal pump program. It is characterised by it self priming capacities, which makes this pump type ideally suited for pumping liquids with entrained air/gasses. By utilising the open impeller it is also possible to pump liquids containing solids. Flow rates up to 200 m3/h with manometric heads up to 9 bar. These pump types have a high degree of interchangeability with centrifugal pumps. Depending on the product to be pumped the pump can be supplied with: - closed impeller
- half open impeller
- open impeller
|
|
Brochure
Manual
|
Hygienic centrifugal pumps -CP-



| The hygienic centrifugal pump is designed to handle liquids with viscosities up to 300 cP with the liquid producing either positive or negative suction on the pump inlet and has flow rates up to 300 m3/h with manometric heads up to 13 bar. Our hygienic centrifugal pump has been built and tested in accordance with EHEDG standards. Depending on the product to be pumped the pump can be supplied with: closed impeller half open impeller open impeller
A special-purpose centrifugal pump was developed for sensitive liquids. This type, CP WW, displaces the medium without damaging it. The CP WW lends itself excellently to the transfer of substances such as curds and liquids containing delicate particles. NEW: Centrifugal pumps with stainless steel electric motors.
| Brochure Manual
|
Pharmaceutical industry
The following functional pump principles are applied in this specific market:
 |  | |
Hygienic centrifugal pumps -CP-



| The hygienic centrifugal pump is designed to handle liquids with viscosities up to 300 cP with the liquid producing either positive or negative suction on the pump inlet and has flow rates up to 300 m3/h with manometric heads up to 13 bar. Our hygienic centrifugal pump has been built and tested in accordance with EHEDG standards. Depending on the product to be pumped the pump can be supplied with: closed impeller half open impeller open impeller
A special-purpose centrifugal pump was developed for sensitive liquids. This type, CP WW, displaces the medium without damaging it. The CP WW lends itself excellently to the transfer of substances such as curds and liquids containing delicate particles. NEW: Centrifugal pumps with stainless steel electric motors.
| Brochure Manual
|
Hygienic lobe pumps -PLP-




| The Pomac PLP lobe pumps are designed to achieve maximum pump performance combined with minimal product damage. Specific attention is paid to the bearing construction and the rigidity of the shaft. The design is kept as compact as possible and the volume between the lobes is optimized. This makes the PLP range suitable for high working pressures up to 15 bar. The application range comprises a capacity of up to 110 m3/h. The entire pump section as well as the gearbox is made of stainless steel. The pump is easily cleaned resulting in less maintenance time. The possibility of mounting the pump with the connections placed vertically("self-draining position") makes it universally applicable. 
The EHEDG-marking only applies to PLP pumps in vertical, self-draining execution, fitted with EHEDG approved connections.
|
Brochure Manual
|
Chemical industry
The following functional pump principles are applied in this specific market:
Starch/de-foaming pumps -PS-



| The Pomac PS series represents the complete range of duty pumps for starch production processes. The programme comprises the necessary pump types for all duties during the different stages of the starch production process. These smooth finished stainless steel pumps are characterized by their optimal hydraulic performance, but also by their unique, modular designed construction and an ample choice of possible shaft sealong materials.
|
Brochure
Dimensional drawings
|
Starch industry
The following functional pump principles are applied in this specific market:
Hygienic Truck pumps -TP-


| The Pomac hygienic truck pumps range comprises a series of special versions of CP, CP/ZA and ZA stainless steel hygienic pumps, the IP impeller pump and the PLP lobe pump, all suited for mounting in trucks. They are hydraulically driven, but can also be supplied with an electric drive.
| Brochure
|
Road transportation of liquids
The following functional pump principles are applied in this specific market:
downloads pompen pomac
Downloads

brochures pomac pompen
Download brochures

handleiding pomac pompen
Download manuals

Grafieken pomac lobbenpompen lobbenpomp
Curves -PLP- lobe pumps
Curves -ZA- centrifugal pumps
grafieken pomac centrifugaalpompen centrifugaalpomp
Curves CP-CP/ZA centrifugal pumps
| 1500 RPM | 1800 RPM | 3000 RPM | 3600 RPM |
Curves WW centrifugal pumps
grafieken pomac wormpompen wormpomp
Curves -SP- eccentric screw pumps
grafieken pomac impellerpompen impellerpomp
Curves -IP- flexible impeller pumps
route pomac telefoonnummer telefoon contact email
Contact
pomac hoofdkantoor bezoekadres postadres
Headquarter
Visiting adress Pomac bv Feithspark 13 9356 BX Tolbert Netherlands Mailing adress Pomac bv P.O.Box 32 9356 ZG Tolbert Netherlands
KvK Groningen 020.52.516
Tel: +31 (0)594 51 28 77 Fax: +31 (0)594 51 70 02 Email: info@pomacpumps.com
|  |
pomac email contactformulier
Bedankt voor het invullen van het formulier. U krijgt zo snel mogelijk antwoord.
routebeschrijving pomac
How to find us
Visiting adress
Pomac bv
Feithspark 13
9356 BX Tolbert
Netherlands
Tel: +31 (0)594 51 28 77
pomac agenten wereldwijd
WORLD WIDE DISTRIBUTORS
| Germany | LEWA GmbH Ulmer Straße 10 71229 Leonberg
| Phone +49 7152 14-0 Fax +49 7152 14-13 0 lewa@lewa.de www.lewa.com |
| Austria | LEWA Pumpen GmbH Diefenbachgasse 35/3/9 1150 Vienna, Austria
| Phone +43 1 8773 040-0 Fax +43 1 8773 040-29 info@lewa.at www.lewa.at |
| France | LEWA S.A.S Z.A. des Sureaux 5-9 Rue d'Estienne d'Orves 78500 Sartrouville, France | Phone 0033 1 308674-80 Fax 0033 1 308674-97 info@lewa.fr www.lewa.fr |
| Ukraine | LEWA – Ukraine LC 15-A, Prospekt 40-richya Zhovtnya 03039 Kiev Ukraine | Phone: +380 44 527 96 31 Fax: +380 44 527 96 05 office(at)lewa.kiev.ua |
| Dubai | Al-Sagar P.O.Box 697, Abu Dhabi, United Arab Emirates | Phone 00971 2 6778700 Fax 00971 2 6728980www.alsagareng.com |
| Italy | Lewa S.R.L Via Vincenzo Monti 52 20017 Mazzo di Rho (Mi) | Phone +39 02 93468-61 Fax +39 02 93468-62 info@lewa.it www.lewa.it |
| Poland | LEWA Pumpen GmbH Diefenbachgasse 35/3/9 1150 Vienna, Austria
| Phone +43 1 8773 040-0 Fax +43 1 8773 040-29 info@lewa.at www.lewa.at |
| Singapore | Apical Network Pte Ltd Blk 83 #06-294 Whampoa Drive Singapore 320083 | Phone 0065-96930200 Fax 0065-6224 8360 apicalnet@yahoo.com.sg |
| Sweden | Temag Pumpar AB Filaregatan 4 442 34 Kungalv
| Phone 0303-140 50 Fax 0303-199 16 temag@temag.se www.temag.se
|
Czech Republic | Katko K Safine 145 14900 Praha 4- Hrncire | Phone 00420 - 296826055 Fax 00420 - 244913258 rbaudys@iwaki.cz |
| Hungary | Gita 3 Parkany u. 15 ll/6 1138 Budapest | Phone 0036- (1) 350 1322 Fax 0036- (1) 350 1322 G. Istvan mobil: 0036- 30 9455 760 gita3@gita3.hu
|