Pumps Automation

Industrial pumps PICP

The Pomac PICP series is a horizontal single-stage volute centrifugal pump. The pump is extremely suited for industrial and chemical applications.

De heavy duty, cast PICP contains an integrated drain and pump feet. The design is based on the so called 'back pull-out system'. This means the pump housing can remain fixed to the piping when performing maintenance.

The dimensions of the PICP centrifugal pump comply with ISO 2858. The pump itself is constructed according to the ISO 5199 norm.

The PICP can be executed with several options:

  • Various shaft seals acc. EN12756 / EN 24960
  • Various O-ring materials
  • Standard equipped with G3/8" drain
  • Lubricated bearing housing for extra-long bearing service life
Max. viscosity < 500 cP
Capacity < 900 m³/h
Pressure < 160 mwc
Impeller Closed
Materials Cast iron, nodular cast iron, 316L
Connection sizes 1,25" / DN32 tot 8" / DN200

Flanges: EN1092-1, ANSI

Shaft sealing Single, double quench/flush, internal and external
Seal materials carbon/SiC, SiC/SiC, Tc/Tc
Elastomers EPDM, Viton, NBR, Teflon, etc.
Surface roughess Standard > 0,8 micron
Drive Standard: IEC, IE3, B3, IP55, isolcl. F, PTC
On request: IE4, ATEX, low noise