Pumps Automation

Centrifugal truck pumps CP-IGH

The Pomac hygienic truck pumps range comprises a series of special versions of CP, CP/ZA and ZA stainless steel hygienic pumps, the IP impeller pump and the PLP lobe pump, all suited for mounting in trucks. They are hydraulically driven, but can also be supplied with an electric drive.

The CP sanitary pump is designed to handle liquids with viscosities upto 500 cP. It will funtion with the liquid producing either a positive or a negative suction on the pump and has flow rates upto 200 m³/h and a manometric head of 3 bar.

The CP unit has been built and tested in accordance with EHEDG Standards. 

Depending on the product to be pumped, the pump can be equipped with:

  • Closed, open and star impellers
  • Various mechanical seal types and materials
  • Various O-ring materials
  • Low surface roughness
  • Drain connection
  • Heating jacket
Capacity < 200 m³/h
Pressure < 30 mlc
Impeller Open, closed, star
Materials Wetted parts: 1.4404
Connections 1,5" / DN40 to 6" / DN150

Couplings: DIN11851, DIN11864-1, SMS1145

Flanges: EN1092-1, DIN11864-2, ANSI

Tri-Clamps: ISO2852, DIN32676, DIN11864-3

Shaft sealing Single, double quench, Inner and outer, according to DIN24960
Sealing materials carbonl/CrM, carbon/SiC, SiC/SiC, Tc/Tc
Elastomers EPDM, Viton, NBR, Teflon, KALREZ, e.g.
according to FDA
Surface roughness         Standard > 0,8 micron
Motor options Hydraulic or Electric motor





Brochure CP-IGH