The centrifugal CPC-ZA is characterised by it self priming capacities, which makes this pump type ideally suited for pumping liquids with entrained air/gasses. By utilising the open impeller it is also possible to pump liquids containing solids. Flow rates up to 200 m3/h with manometric heads up to 9 bar.
Depending on the pumped product the pump can be supplied with:
|Capacity||< 200 m³/h|
|Pressure||< 90 mlc|
|Materials||Wetted parts: 1.4404|
|Connections||1,5" / DN40 to 6" / DN150|
Couplings: DIN11851, DIN11864-1, SMS1145
Flanges: EN1092-1, DIN11864-2, ANSI
Tri-Clamps: ISO2852, DIN32676, DIN11864-3
|Shaft sealing||Single, double quench/flush, Inner and outer, EHEDG. according to DIN24960|
|Sealing materials||carbon/CrM, carbon/SiC, SiC/SiC, Tc/Tc|
|Elastomers||EPDM, Viton, NBR, Teflon, KALREZ, e.g.
according to FDA
|Surface roughness||Standard > 0,8 micron|
|Motor options||Standard: IEC, IE3, B3/B5, IP55, isolcl. F, PTC
Optional: IE4, ATEX, noise reduction